Yield enhancement of elliptical high harmonics driven by bicircular laser pulses

We theoretically investigate the yield enhancement of elliptical high harmonics in the interaction of molecules with bicircular laser pulses by solving the time-dependent Schrödinger equation. It is shown that by adjusting the relative intensity ratio of the two bicircular field components in specific ranges the yield of the molecular high harmonics for the plateau and cutoff regions can be respectively enhanced. To analyze this enhancement phenomenon, we calculate the weights of the electron classical trajectories. Additionally, we also study the ellipticity distribution of harmonics for different intensity ratios. We find that these enhanced harmonics are elliptically polarized, which we mainly attribute to the recombination dipole moment of the major weighted trajectories. These enhanced elliptical extreme ultraviolet and soft x-ray radiations may serve as essential tools for exploring the ultrafast dynamics in magnetic materials and chiral media.     

On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II

In this paper an inclined edge cracked short beam specimen subjected to symmetric three-point bend loading was designed and examined for conducting mixed-mode I/II fracture toughness experiments. The aspect ratio (i.e. length to width ratio) and the loading span distance are considered much lower than the other conventional cracked bend beam samples. Crack tip parameters such as stress intensity factors and T-stress were computed numerically for this specimen by several finite element analyses and it was demonstrated that the specimen is able to produce full combinations of mode I and II including pure mode II. The practical capability of the short bend beam specimen was studied experimentally by conducting a set of mixed-mode fracture tests on PolymethylMethacrylate (PMMA) as a well-known model brittle material. The critical stress intensity factors, the direction of fracture kinking and the path of fracture trajectory were investigated both experimentally and theoretically using two stress and strain-based fracture criteria. The fracture toughness of tested PMMA was decreased by moving towards mode II case due to the effect of T-stress on the fracture mechanism of the short bend beam specimen.     

Selective Excitation with Asymmetric Adiabatic Pulses for NMR Spectroscopy

Existing selective pulses are mainly constructed in the forms of classically shaped pulses, such as the Gaussian pulses, or generated by using numerical optimization methods. However, all of these pulses are highly sensitive to radiofrequency (RF) intensity variation, which means their performance is highly dependent on the accuracy and stability of the RF intensity. Even a slight RF intensity deviation can cause severe degradation in the excitation profile. To solve this problem, we propose a method for narrow selective excitation by sequential application of a pair of phase‐opposite asymmetric adiabatic pulses, all within two scans. By retaining the adiabatic character, the new method is highly robust to RF intensity variation. Moreover, it has flexible excitation bandwidth, ranging from line‐selective to narrow‐band‐selective pulses. The method is tested both in numerical simulations and solution‐state NMR experiments.     

Match statistics for sequence-based alleles in profiles from forensic PCR-mps kits

The first autosomal sequence-based allele (aka SNP-STR haplotype) frequency database for forensic massively parallel sequencing (MPS) has been published, thereby removing one of the remaining barriers to implementing MPS in casework. The database was developed using a specific set of flank trim sites. If different trim sites or different kits with different primers are used for casework, then SNP-STR haplotypes may be detected that do not have frequencies in the database. We describe a procedure to address calculation of match probabilities when casework samples are generated using an MPS kit with different trim sites than those present in the relevant population frequency database. The procedure provides a framework for comparison of any MPS kit or database combination while also accommodating comparison of MPS and CE profiles.     

Characterization of short duration stress pulses generated by impacting laminated carbon-fiber/epoxy composites with magnetic flyer plates

Short duration stress pulses are of particular interest in determining the interfacial crack tip instability criteria for the dynamic fracture behavior of laminated carbon-fiber/epoxy composites. However, the heterogeneous architectures of laminated composites can alter the characteristics of a stress pulse as it propagates toward a crack tip. This makes it difficult to use standard dynamic testing techniques for characterizing these materials, since these techniques assume the characteristics of the stress pulse do not change as a result of propagation and can therefore be unambiguously determined from impact conditions. This paper presents a novel experimental technique that has been developed for characterizing short duration stress pulse propagation in laminated composite materials. In this technique, a dynamic moiré interferometer is used to capture fringe patterns corresponding to displacement fields associated with short duration stress pulses that were generated by impacting 0° and 90°/0°/90° carbon-fiber/epoxy composites with a magnetic flyer plate. Appropriate dynamic testing conditions for capturing high fidelity fringe patterns were determined using the recently developed dynamic moiré fringe contrast factor. The effects of the composite architecture on the propagation of short duration stress pulses observed with the dynamic moiré interferometer were confirmed by transient dynamic finite element analysis. From comparisons of experimental and numerical data, it was determined that the impact conditions for the magnetic flyer plate and laminated composite will not necessarily be planar, which has a significant effect on the intensity and duration of the propagating stress pulse.     

Local fracture resistance based on microstructural efficiency concept and simulation of injection molding

Local fracture resistance (FR) of short (SGF) and discontinuous long glass fibre (LGF) reinforced polypropylene (PP) was predicted using the ‘microstructural efficiency concept’ together with a simulation program for fibre orientation in injection molding. The ‘microstructural efficiency concept’ describes the relation between microstructural parameters such as the fibre content, the fibre aspect ratio and the processing (injection molding) induced layer structure taking also into account the local fibre orientation. The local fibre orientation in injection molding was predicted with the MOLDFLOW^®-software. The predicted local FR was compared with the measured one, which was determined by using compact tension samples and linear elastic fracture mechanics (LEFM). The comparison showed, that for SGF-PP good consistence between the predicted and measured FR existed, for LGF-PP the discrepancy was higher. Yet for both materials, the ‘microstructural efficiency concept’ together with the results obtained from the simulation of the fibre orientation can be used for FR prediction of an injection molded workpiece.     

A novel nanoscale fin field effect transistor by amended channel: Investigation and fundamental physics

The present paper proposes a new Fin Field Effect Transistor (FinFET) with an amended Channel (AC). The fin region consists of two sections; the lower part which has a rounded shape and the upper part of fin as conventional FinFETs, is cubic. The AC-FinFET devices are proven to have a lower threshold voltage roll-off, reduced DIBL, better subthreshold slope characteristics, and a better gate capacitance in comparison with the C-FinFET. Moreover, the simulation result with three-dimensional and two-carrier device simulator demonstrates an improved output characteristic of the proposed structure due to reduction of self-heating effect. Due to the rounded shape of the lower fin region and decreasing corner effects there, the heat can flow easily, and the device temperature will decrease. Also the gate control over the channel increases due to the narrow upper part of the fin. The paper, thus, attempts to show the advantages of higher performance AC-FinFET device over the conventional one, and its effect on the operation of nanoscale devices.     

Black phosphorus saturable absorber for ultrafast mode‐locked pulse laser via evanescent field interaction

Black phosphorus, or BP, has found a lot of applications in recent years including photonics. The most recent studies have shown that the material has an excellent optical nonlinearity useful in many areas, one of which is in saturable absorption for passive mode‐locking. A direct interaction scheme for mode‐locking, however, has a potential to optically cause permanent damage to the already delicate material. Evanescent field interaction scheme has already been proven to be a useful method to prevent such danger for other 2‐dimensional nanomaterials. In this report, we have utilized the evanescent field interaction to demonstrate that the optical nonlinear characteristics of BP is sufficiently strong to use in such an indirect interaction method. The successful demonstration of the passive mode‐locking operation has generated pulses with the pulse duration, repetition rate, and time bandwidth product of 2.18 ps, 15.59 MHz, and 0.336, respectively.     

The effect of impurities on the viscoelastic response of polycarbonate reinforced with short glass fibers

Observations are reported in oscillatory torsion tests at room temperature on unfilled and fiber-reinforced polycarbonates melt-blended with impurities (acronitrile–butadiene–styrene, high-impact polystyrene, low-density polyethylene, poly(ethylene terephthalate) and Nylon 6,6). Constitutive equations are derived for the viscoelastic behavior of glassy polymers. With reference to the theory of cooperative relaxation, a polymer is treated as an ensemble of meso-regions with arbitrary shapes and sizes. The time-dependent response of the ensemble is attributed to rearrangement of meso-domains. The rearrangement events occur at random times, when meso-regions are excited by thermal fluctuations. Stress–strain relations are derived by using the laws of thermodynamics. The governing equations are determined by four adjustable parameters that are found by fitting the experimental data. Fair agreement is demonstrated between the observations and the results of numerical simulation. The study focuses on the effects of the concentration of impurities and glass fibers on material parameters.     

Polarization-enhanced bulk photovoltaic effect of BiFeO3 epitaxial film under standard solar illumination

In this Letter, we report the polarization-enhanced bulk photovoltaic effect (BPV) in pristine BiFeO₃ (BFO) epitaxial film under standard 1 sun AM 1.5 G illumination. High-quality epitaxial BFO films are grown on (001)-oriented niobium doped-SrTiO₃ substrates by pulsed laser deposition. The best BFO film based photovoltaic device achieves a power conversion efficiency of 0.0062% under standard illumination. Besides, it is found that the number of bipolar pulses plays a key role in improving the short-circuit current density and open-circuit voltage. These results are beneficial for further understanding of physical origin of the photovoltaic properties in ferroelectric oxides.